Airtac HFCQ40 Pneumatic Finger

Li, Betty

2 years ago

Features

The hollow tube can be matched with the mechanism to achieve the blowing effect
The jaws and piston rods are made of high-grade stainless steel, which has high strength, corrosion resistance and small assembly clearance, low shaking and high durability
All series are equipped with a dust jacket, which can also be used in special occasions.
A positioning hole is attached to the bottom of the body, which can improve the precision and the consistency of repeated dismounting and positioning
The tail end is equipped with a push rod mechanism for the push function.
The sensor grooves of each specification are shared.

Models

Air finger: HFCQ16, HFCQ20, HFCQ25, HFCQ32, HFCQ40, HFCQ50, HFCQ63

Cylinder push rod mechanism: HFCQ32E, HFCQ40E, HFCQ50E, HFCQ63E

Spring push rod mechanism: HFCQ32V, HFCQ40V, HFCQ50V, HFCQ63V

Ordering Code

Specifications

Bore sizes (mm)	16	20	25	32	40	50	63
Acting type	Double acting
Fluid	Air(to be filtered by 40um filter element)
Operating pressure	0.2-0.7MPa(28-100psi)(2.0-7.0bar)			0.15-0.7MPa(22-100psi)(1.5-7.0bar)
Temperature ℃	-20-70
Lubrication	Not required
Repeatability mm	±0.01
Max. frequency	120(c.p.m)			60(c.p.m)
Sensor switches	CMSH, DMSH(S)
Port size	M3x0.5	M5x0.8
Hollow diameter	Փ3+0.04 +0	Փ3+0.04 +0	Փ4+0.048 +0	Փ6+0.04 +0	Փ10+0.058 +0	Փ12+0.07 +0	Փ16+0.07 +0
Push rod mechaniam	–			Cylinder or spring push rod mechanism
Port size of push rod mechanism	–			M5x0.8

Specifications of Cylinder Push Rod Mechanism

Model	HFCQ32E	HFCQ40E	HFCQ50E	HFCQ63E
Acting type	Double acting
Fluid	Air(to be filtered by 40um filter element)
Operating pressure	0.2-0.7MPa(28-100psi)(2.0-7.0bar)	0.15-0.7MPa(22-100psi)(1.5-7.0bar)
Temperature ℃	-20-70
Lubrication	Not required
Push stroke mm	7	8	14	15
Max. frequency	60(c.p.m)
Sensor switches	DMSH(S)
Push force N (0.5MPa)	45	130	204	335
Weight g	560	790	1350	2280

Specifications of Spring Push Rod Mechanism

Dimensions