Site icon Industrial Equipment MRO-Make purchasing faster and easier

GAMX-2013H Control Board

GAMX-2013H

GAMX-2013H

GAMX-2013H Control Board

Technical Parameter:

(1) AutomaticControl

1. Input signal: 4-20mA

2. Output signal: 4-20mA

3. Running direction: In standard form, the actuator (facing to output shaft) opens clockwise, the 4mA valve closes, and the 20mA valve opens.

4. Interrupt retention: Standard: the actuator remains in place when the signal is lost.

(2) Remote Control

1. Standard: The remote control is passive contact control. In the case of dry contact control, the actuator can receive pulse remote commands (without self-holding) to complete the opening and closing of the valve.

2. Non-standard: The remote control is passive contact control. In the case of dry contact control, the actuator can receive pulse remote commands (self-holding) to complete the opening and closing of the valve.

(3) Local Control

1. Standard: The control is passive contact control. In the case of dry contact control, the actuator can receive pulse local commands (without self-holding) to complete the valve opening and closing.

2. Non-standard: Through the dial switch, the actuator can receive the pulse local command (self-holding) to complete the opening and closing of the valve.

Exit mobile version