GP30 Traversing Drive

GP15-60 Traversing Drive

Application Scope

1. Widely used in wire and cable, textile, plastic products, rope production and other industries, evenly lined into a loop of fried wire and rewind into a disk.
2. The wire passes through the wire wheel or the wire roller on the traversing drive, adjusts the wire pitch as required, and evenly and reciprocally wound onto the take-up reel.
3. The opening and the pitch of the cable are within the specified range, and can be adjusted arbitrarily to meet the process requirements of the collection and distribution line.

Advantages

1. Stepless speed regulation: The receiving shaft transmits a certain speed to the plain shaft. Without changing the speed of the plain shaft, just dialing the indicator on the dial can adjust the speed of the coil reciprocating motion in the direction of the rod axis. The value can be set from 0 to the maximum pitch.
2. Instantaneous commutation: There is no need to change the direction of rotation of the plain shaft. When the movable arm reversing wheel hits the block, the direction of travel of the cable aligner can be changed instantaneously, and the commutation time is not less than 1 second.
3. High-speed cable: The linear motion of the traversing drive on the plain shaft can reach 4 m / s, which can meet the requirements of high cable speed and frequent commutation.
4. Release device: Loosen the release lever without stopping the machine, and hold the traversing drive at any position on the plain shaft. (For example, the cable starts working from the end)

Model Description

A Series Traversing Drive : main unit

B Series Traversing Drive: main unit + wire roller or wire wheel

C Series Traversing Drive: main unit + wire roller or wire wheel + plain shaft + Bracket Plate + screw rod + guide rail = Assembly

Main Parameters and Assembling Diagram

Model	AXBXC	D	E	F	G	H	I	J	K	M	S	N	4-M	Thrust N	Weight Kg	Travel Pitch
GP15	90X50X66				14	38	18	27	48		30	34	4-M6	100	1.2	0.1-11
GP20	123X71X85	150	30-60	25	14	40	18	35	62	50	40	42	4-M6	135	2.5	0.1-16
GP30	141X87X105	150	30-60	25	14	46	20	65	76	50	60	62	4-M6	265	8.5	0.1-25
GP40	165X106X121	250	30-70	32	26	56	28	70	82	60	60	62	4-M8	420	11.2	0.5-32
GP50	220X132X160	400	40-95	38	35	70	36	90	116	85	90	104	4-M8	700	33	0.5-40
GP60	240X150X182	460	40-120	38	35	70	36	90	130	90	104	110	4-M8	1200	42	0.5-48

C Series Parameters and Assembling Diagram

Model	d2	L1	L2	L3	L4	L5	L6	H1	H2	Md	Key Groove （W X D）
GP15	Ф15	450	14	70		40		75	15	M8	5X2.5
GP20	Ф14	450	14	102	40	41	30	90	15	2-M8	5X2.5
GP30	Ф20	500	16	136	60	54	40	105	20	2-M10	6X3
GP40	Ф25	800	20	148	80	47	40	117	25	2-M10	8X4
GP50	Ф35	1000	22	220	130	58	40	160	25	2-M10	10X5
GP60	Ф45	1200	25	220	150	58	40	180	25	2-M10	10X5