JPQ-M Progressive Distributor

Product Features:

Entire structure, good sealing, high pressure, suitable for heavy load lubrication system;

Sub-mother connection, and can separate oil to secondary and third grades;

Optional installation of cycle indicator for remote monitoring or controlling of the lubrication system.

Model Tag:

Note 1: the suffix “D” refers to joint with one-way valve, no is no one-way valve tighten a screw joint;Receive 8 mm outside diameter of pipe oil outlet need joint length staggered when installation
Note 2: the same mouth on both sides of the valve core to oil displacement;The same pay different discharge in the distributor is only applicable to 2 series;1 each mouth to oil displacement are the same series, and 0.2 ml/cycle;
Note 3: standard model for the even number for 6 ~ 20 oil mouth, if you need an odd number or number of oil of less than 6 mouth to mouth, can also be identified in model.
Model example:
6 JPQ – M1 / d: 0.2/66 series JPQ – 1 M series progressive distributor;Six standard oil outlet;Each displacement 0.2 ml/cycle;Receive 6 mm outside diameter of pipe inlet joint;Oil outlet by 6 mm diameter D check valve pipe fittings.

Technical Parameters:

Number of holes		≤6	8	10	12	14	16	18	20
JPQ-M1	H	60	75	90	105	120	135	150	165
JPQ-M2	H	74	95	116	137	158	179	200	221

 

Model	Displacement per hole	Nominal pressure	Starting pressure	Ports Number	Inlet and outlet pipe diameter
	ml/cy	MPa	Mpa	PCS	mm
*JPQ-M1/0.2/**	0.2	31.5	≤1.5	6~20	Φ6 Φ8
*JPQ-M2/…/**	0.15；0.20；
	0.30；0.38；
	0.48；0.60；
	0.72；0.86；

Product Dimensions: