QTYH-25 High Pressure Valve

QTYH-25 High Pressure Regulator YONGCHENG

Features

1. The high pressure valve is an accessory of the pneumatic control valve. It decompress and stabilize the pressure of the air source to a fixed value, so that the control valve can obtain a stable air source power for adjustment and control;
2. The outlet pressure is not affected by the inlet pressure and flow rate. It reduces both the dynamic pressure and the static pressure, and can keep the set outlet pressure constant.
3. The adjustment operation is convenient, only adjusting the screw of the pilot valve to obtain a stable outlet pressure.
4. Good energy-saving effect, small pressure loss, large flow, small volume and light weight.
5. Long life, important parts are made of special materials, basically no maintenance.

Application

QTYH series valves air intake can reach 40kg pressure (4.0Mpa), and the pressure regulating valve range is 0-3.5Mpa. It is suitable for high pressure output regulation, such as blow molding machine, bottle blowing machine, nitrogen bottle, etc. product pressure reduction, pressure regulating valve.

Dimensions

Model	A	B	C	D	E	F	d	d1
QTYH-08	156.5	121	55X55	G1/4	32.5	28	G1/4	63
QTYH-10	156.5	121	55X55	G3/8	32.5	28	G1/4	63
QTYH-15	156.5	121	55X55	G1/2	32.5	28	G1/4	63
QTYH-20	232	164.5	75X75	G3/4	32.5	44	G1/4	98
QTYH-25	232	164.5	75X75	G1	32.5	44	G1/4	98
QTYH-35	256	155	100X100	G1 1/4	32.5	77	G1/4	100
QTYH-40	256	155	100X100	G1 1/2	32.5	77	G1/4	100
QTYH-50	256	155	100X100	G2	32.5	77	G1/4	100

Installation:

1. QTYH valves should be installed as vertical as possible;
2. When QTYH valve is used in combination, pay attention to the front and rear order, that is, before the air filter, the pressure valve is second, and the lubricator is after;
3. When installing, pay attention to IN: air inlet, OUT: air outlet;
4. Pay attention to air cleanliness when used alone, otherwise please use an air filter;
5. Loosen the handle when installing, so that the pressure regulating spring is in a free state.