Site icon Industrial Equipment MRO-Make purchasing faster and easier

Single Phase EMI Filter DNF055-G-30A

DNF055-G-30A

DNF055-G-30A

DNF055-G-30A Single Phase EMI Filter

Features:

Technical Parameters:

Type Rated

Voltage

Rated

Current

Hi-Pot Test Voltage Cx(μF)

 

±10%

Cy(nF)

 

±20%

L(mH)

 

-30%~+50%

R(MΩ)

 

±10%

Leakage Current

 

250V  50Hz

Line-Line Line-Ground
DNF055-G-20A 250V-50/60Hz 20A 1800VDC,2s 1800V-50/60Hz,2s 3.0 10.0 1.2 3.3 <2.3mA
DNF055-G-30A 250V-50/60Hz 30A 1800VDC,2s 1800V-50/60Hz,2s Cx1=0.22

Cx2=0.47

10.0 0.6 1.0 <2.3mA
DNF055-G-40A 250V-50/60Hz 40A 1800VDC,2s 1800V-50/60Hz,2s Cx1=0.22

Cx2=0.47

10.0 0.6 1.0 <2.3mA
DNF055-H-4A 250V-50/60Hz 4A 1800VDC,2s 1800V-50/60Hz,2s 0.47 4.7 16.0 1.0 <1.1mA
DNF055-H-6A 250V-50/60Hz 6A 1800VDC,2s 1800V-50/60Hz,2s 0.47 2.2 11.0 1.0 <1.1mA
DNF055-H-10A 250V-50/60Hz 10A 1800VDC,2s 1800V-50/60Hz,2s 1.0 4.7 L1=11.0

L2=5.0

1.0 <1.1mA
DNF055-H-13A 250V-50/60Hz 13A 1800VDC,2s 1800V-50/60Hz,2s 0.47 2.2 L1=0.03

L2=4.0

1.0 <1.0mA

Electrical Schematic:

Dimensions:

Installation Instructions:

1) Good electrical connection is needed between filter casing and equipment shell.

2) Connecting the filter’s input and output according to the provision on the label of LINE and LOAD.

3) The input wiring and the output wiring should be strictly separated, cannot be bundled together.

Exit mobile version