Site icon Industrial Equipment MRO-Make purchasing faster and easier

Three Phase EMI Filter DNF52-3PH-4x50A

DNF52-3PH-3X35A EMI FILTER

DNF52-3PH-3X35A EMI FILTER

Three Phase EMI Filter DNF52-3PH-4x50A

Features

Technical Parameters:

Type Rated

Voltage

Rated

Current

Hi-Pot Test Voltage Cx(μF)

±10%

Cy(nF)

±20%

L(mH)

-30%~+50%

R(MΩ)

±10%

Leakage Current

250V~50Hz

Line-Line Line-Ground
DNF52-3PH-3x35A 440V-50/60Hz 35A 1800VDC,2s 2000V-50/60Hz,2s 1.0 10.0 1.3 1.0 <4.0mA
DNF52-3PH-3x50A 440V-50/60Hz 50A 1800VDC,2s 2000V-50/60Hz,2s 1.0 10.0 0.8 1.0 <4.0mA
DNF52-3PH-4x35A 440V-50/60Hz 35A 1800VDC,2s 2000V-50/60Hz,2s 1.0 4.7 1.0 0.68 <6.0mA
DNF52-3PH-4x40A 440V-50/60Hz 40A 1800VDC,2s 2000V-50/60Hz,2s 1.0 4.7 1.0 1.0 <6.0mA
DNF52-3PH-4x50A 440V-50/60Hz 50A 1800VDC,2s 2000V-50/60Hz,2s 1.0 10.0 0.6 1.0 <4.0mA
DNF52-Y-4x35A 440V-50/60Hz 35A 2121VDC,2s 2700V-50/60Hz,2s 1.0 10.0 1.2 1.0 <4.0mA
DNF52-Y-4x50A 440V-50/60Hz 50A 2121VDC,2s 2700V-50/60Hz,2s 1.0 10.0 0.8 1.0 <4.0mA

Electrical Schematic:

Dimensions:

Installation Instructions:

1) Good electrical connection is needed between filter casing and equipment shell.

2) Connecting the filter’s input and output according to the provision on the label of LINE and LOAD.

3 )  The input wiring and the output wiring should be strictly separated, cannot be bundled together.

Exit mobile version