Site icon Industrial Equipment MRO-Make purchasing faster and easier

V45K2-15 Electro-pneumatic Valve

V45K2-15 Electro-pneumatic Valve2

V45K2-15 Electro-pneumatic Valve

Introduction:

V45K2-15 Solenoid valves are used for electronically controlled operation of pneumatic valves “on” or “off”. It is compliant with NAMUR connection standards, mounted directly on the side of the pneumatic actuator without pipes. According to the instrument control system, you need to select single or dual electronic control. The two-position five-way solenoid valve is equipped with a double-acting actuator, and the two-position three-way solenoid valve is equipped with a single-acting actuator. At the same time, the product has basic type (IP67) and explosion-proof type, the explosion-proof grade is ExdIIBT4, and its explosion-proof grade is suitable for the explosive environment of the factory. It is also possible to select a suitable voltage as needed.

Technical Parameters

Structure type: Slide

Action mode: Electromagnet or manual operation; Manual status lock is achieved by pressing and rotating the manual operation button.

Reset method: Pneumatic spring reset, mechanical spring reset,electromagnet operation reset.

Interface: ISO228/1 standard G1/4

Ambient temperature: -20 ° C ~ +60 ° C (explosion-proof type -15 ° C ~ +50 ° C)

Medium temperature: -20 ° C ~ +80 ° C (explosion-proof type -15 ° C ~ +50 ° C)

Material quality: Body and internal parts: anodized aluminum alloy, copper.

Reinforced end cap: plastic.

Sealing ring: styrene butadiene rubber (NBR) and polyurethane (AU).

Installation: Double hole in accordance with NAMUR standard and VDI/VDE3845.

Electrical data

Standard Voltage: 24VDC, 24VAC50Hz, 110VAC50Hz, 220VAC50Hz

Special voltage: 6V ~ 110VDC, 12V ~ 254VAC, 50 or 60Hz

Voltage deviation: ±10% standard and explosion-proof (ExdIIBT4) coil

Power consumption: Standard coil: AC starting power 6VA, stable power 4.3VA (hot state) DC2.6W (hot state), 3W (cold state)

Way of working: 100% ED (DB), continuous operation.

Protection level: IP65 with correct mounting connector to DIN43650B

Electrical connections: Pg9 connector

Pneumatic Device

Features: 2-position 3-way NC (V45C2), 2-position 5-way (V45K2)

Medium: Filtered (50 micron), lubricated or non-lubricated compressed air, and dry the dew point to -20 ° C.

Limited Data: V45C2: QNn=1060N1/min; V45K2 type: 1-2QNn-1060N1/min, 2-3QNn=1060N1/min

Nominal diameter: DN7mm

Commutation time: About 40 milliseconds

Special equipment: Explosion-proof coil EExmT6

Dimensions:

Exit mobile version