VM Series Pneumatic Pinch Valve
Introduction:
VM-type Pinch Valves are used for interception of the material flow in pneumatic conveying systems, or other pipelines. In addition, they can be installed as a locking device for silo filling pipes.
In the open position the internal cross section of the Valve is identical with the connecting pipe diameter. By introducing compressed air or, especially with small valves, water under pressure through the threaded bore into the interior of the Valve, the internal flexible sleeve is reshaped in such a way that the passage is hermetically sealed. VM Pinch Valves equally handle pneumatically conveyed powders, granules, fibres, dense mixtures and liquids.
Specification：
Model: VM100BB0
Material: Aluminum
Connection form: Flange
Nominal diameter: DN100 (mm)
Sealed form: Soft seal type
Pressure environment: Low pressure
Working temperature: Normal temperature
Standard: Italian WAM
Flow direction: Two-way
Form: Expansion
Applicable medium: Powder
Use: Discharging
Dimensions:
