Fluke 805/805 FC Vibration Meter
Introduction:
The 805/805 FC Vibration Meter (the Meter or Product) is a screening tool for bearings and overall vibration measurements on machines. The Meter includes these features:
- Overall vibration measurement
- Bearing health measurement with Crest Factor+
- On-screen severity scales
- Acceleration, Velocity, and Displacement units of measure
- Temperature measurement with spot IR sensor
- Test results export to MS Excel template
- Belt Holster
- IP54
- Audio output (805 only)
- Flashlight
- Stores up to 3,500 records
- USB support
- Storage/shipping case
- External accelerometer support
- Wireless data transmission of most recent measurement for use with Fluke Connect Phone App (805 FC only)
Specifications:
| Sensor | |
| Sensitivity (typical) | 100 mV / g ±10 % |
| Measurement Range | 0.01 g to 50 g |
| Frequency Range | 10 Hz to 1,000 Hz
and 4,000 Hz to 20,000 Hz |
| Resolution | 0.01 g |
| Accuracy (typical) | At 100 Hz: ±5 % of measured
value |
| Amplitude Units | Acceleration: g, m/sec 2
Velocity: in/sec, mm/sec Displacement: mils, μm |
| Infrared Thermometer | |
| Temperature Measurement | |
| Range | -20 °C to 200 °C (-4 °F to 392 °F) |
| Accuracy (typical) | -20 °C to 120 °C(-4 °F to 248 °F): ±2 °C (4 °F)
120 °C to 160 °C(248 °F to 320 °F): ±3 °C (6 °F) 160 °C to 200 °C(320 °F to 392 °F): ±4 °C (7 °F) |
| Focal length | Fixed, at ~3.8 cm (1.5 in) |
| External Sensor | |
| Frequency Range | 10 Hz to 1,000 Hz |
| Bias Voltage (to supply power) | 20 V DC to 22 V DC |
| Bias Current (to supply power) | 5 mA |
| Vibration Meter | |
| Low Frequency Range
(overall measurement) |
10 Hz to 1,000 Hz |
| High Frequency Range
(CF+ measurement) |
4,000 Hz to 20,000 Hz |
| Vibration Limit | 50 g peak (100 g peak-peak) |
| Battery Type | AA (2) lithium non-rechargeable
3 V dc |
| Battery Life | 805: 250 measurements
805 FC, Fluke Connect enabled: 210 measurements |
| A/D Converter | 16-bit |
| Sampling Rate | Low Frequency: 20,000 Hz
High Frequency: 80,000 Hz |
| Signal to Noise Ratio | 80 dB |
| Real Time Clock Backup | Coin Battery |
| Size (L x W x H) | 24.1 cm x 7.1 cm x 5.8 cm (9.5 in x
2.8 in x 2.3 in) |
| Weight | 0.40 kg (0.89 lb) |
| Connectors (805) | USB Mini-B 7-pin, Stereo Audio Output Jack (3.5 mm Audio Plug), External Sensor Jack (SMB connector) |
| Connectors (805 FC) | USB Mini-B 7-pin, External Sensor Jack (SMB connector) |
| Firmware | |
| External Interfaces | USB 2.0 (full speed) communication |
| Data Capacity | Database on internal flash memory |
| Upgrade | through USB |
| Memory | Up to 3,500 measurements |
| Environmental | |
| Operating Temperature | -20 °C to 50 °C (-4 °F to 122 °F) |
| Storage Temperature . | -20 °C to 60 °C (-4 °F to 140 °F) |
| Operating Humidity | 10 % to 95 % RH (non-
condensing) |
| Operating/Storage Altitude | Sea Level to 3,048 meters (10,000 feet) |
| IP Rating | IP54 |
| Vibration Limit | 500 g peak |
| Drop Test | 1 meter |
