DNF09-3PH-4X2A Three Phase EMI Filter
Features：
- High performance
- Excellent characteristics of electromagnetic interference suppression
- Customization accepted
Technical Parameters：
| Type | Rated
Voltage |
Rated
Current |
Hi-Pot Test Voltage | Cx(μF)
±10% |
Cy(nF)
±20% |
L(mH)
-30%~+50% |
R(MΩ)
±10% |
Leakage Current
250V 50Hz |
|
| Line-Line | Line-Ground | ||||||||
| DNF09-3PH-3x2A | 440V-50/60Hz | 2A | 1800VDC,2s | 1800V-50/60Hz,2s | 1.0 | 4.7 | 14.0 | 0.68 | <1.5mA |
| DNF09-3PH-3x3A | 440V-50/60Hz | 3A | 1800VDC,2s | 1800V-50/60Hz,2s | 1.0 | 4.7 | 12.0 | 0.68 | <1.5mA |
| DNF09-3PH-3x5A | 440V-50/60Hz | 5A | 1800VDC,2s | 1800V-50/60Hz,2s | 1.0 | 4.7 | 4.0 | 1.0 | <1.5mA |
| DNF09-3PH-3x10A | 440V-50/60Hz | 10A | 1800VDC,2s | 1800V-50/60Hz,2s | 1.0 | 4.7 | 1.8 | 1.0 | <2.0mA |
| DNF09-3PH-4x2A | 440V-50/60Hz | 2A | 1800VDC,2s | 1800V-50/60Hz,2s | 1.0 | 4.7 | 16.0 | 0.68 | <2.0mA |
| DNF09-3PH-4x10A | 440V-50/60Hz | 10A | 1800VDC,2s | 1800V-50/60Hz,2s | 1.0 | 4.7 | 1. 5 | 1.0 | <2.0mA |
Electrical Schematic：
Dimensions:
Installation Instructions:
1） Good electrical connection is needed between filter casing and equipment shell.
2） Connecting the filter’s input and output according to the provision on the label of LINE and LOAD.
3） The input wiring and the output wiring should be strictly separated, cannot be bundled together.
