AirTAC Pneumatic Finger HFR10
——180° Open / Close Style
Features
- Asheet metal is installed between the finger and body to reduce abrasion and extend the service life.
- Dust proof is designed in the finger part, which is applicable to special working environment.
- 180 open/close type, simplify the gripping action.
- Can be mounted from three directions, surface installation, tail installation and front installation.
- The magnetic switch slots convenient to install inducting switch.
Ordering Code
Specifications
| Bore size(mm) | 10 | 16 | 20 | 25 | 32 |
| Acting type | Double acting | ||||
| Fluid | Air(to be filtered by 40 µ m filter element)
|
||||
| Operating Pressure | 0.15-0.7MPa(21-100psi)(1.5-7.0bar) | ||||
| Temperature℃ | -20-70 | ||||
| Lubrication | Cylinder: Not required; Gripper jaws: Lubricate grease | ||||
| Cushion Type | Bumper | ||||
| Max. Frequency | 60(c.p.m) | ||||
| Repeatability | ±0.2mm | ||||
| Gripping Force | 0.16N.m | 0.55N.m | 1.10N.m | 2.30N.m | 5.00N.m |
| Open or close angle | Open: -2°–5° Close: 180° ±2° | ||||
| Port Size | M5x 0.8 | ||||
| Sensor Switches | CMSH/DMSH(S) | ||||
Dimensions
