Airtac HFD20X40 Compact Air Gripper
Product feature
- The double-track design increases the load span and the bending moment (Mr) load is better.
- Double piston drive, double output, for greater clamping force.
- The bottom of the body is provided with a positioning hole which can improve the precision and the consistency of repeated dismounting and positioning.
- The iaw rails are made of stainless steel for high rigidity and corrosion resistance
- Can be fixed in four directions and has a high degree of freedom.
- The overall height is reduced by about 50% compared to the parallel jaw product of the same clamping force, effectively reducing the device space and sloshing moment.
Ordering Code
Specifications
| Bore Size (mm) | 8 | 12 | 16 | 20 | 25 | |
| Acting type | Double acting | |||||
| Fluid | Air(to be filtered by 40pm filter element) | |||||
| Operating pressure | 0.15-0.7MPa(22-100psi)(1.5-7.0bar) | |||||
| Proof pressure | 1.2MPa(175psi)(12bar) | |||||
| Temperature | -20-70℃ | |||||
| Lubrication | Not required | |||||
| Repeatability mm | ±0.05 | |||||
| Max. frequency | Longer stroke | 60(c.p.m) | ||||
| Middle and short stroke | 120(c.p.m) | |||||
| Sensor switches | CMSH, DMSH(S) | |||||
| Port size | M3x0.5 | M5x0.8 | ||||
