SHIMADEN Digital Indicator SD16A-890-1000
Features
- DIN Size 48 x 96 mm
- ±0.3% High Accuracy Indication
- Large 20 mm bright display. Make reading from long distance and low light location easier
- Multi-inputs & Multi-ranges. User selectable Thermocouple, RTD, V, mV and Current inputs A 250W resistor is required across the input terminal for 4-20mA DC
- Inverse scaling possible. With voltage and current input signals, normal and inverse scaling is possible. Additionally, normal and inverse scaling is possible for the analog output signals.
- Dust and splash proof front panel. Equivalent to IP66
- Wide range of optional features. Alarms, analog output signals and communication interface (RS-232C or RS-485: MODBUS /Shimaden) available; Sensor power supply 24V DC available; A six-point selector switch, (the KR16A series), is available for combined use.
Ordering Code
Specifications
| communication type | EIA RS-232C, RS-485 compatible |
| Communication system | RS-232C, 3-line half duplex system
RS-485, 2-ine half duplex muli-drop (bus) system |
| Synchronization system | Half duplex start-stop synchronization system |
| Communication distance | RS-232C 15 m maximum
RS-485 maximum total of 500 m (differs depending on conditions.) |
| Communication speed | 1200, 2400, 4800, 9600, 19200 bps |
| Transmission procedure | No procedure |
| Communication address | 1~100 |
| Number of connectable devices | 31 devices max. (for RS-485) |
| Delay | 1-100 msec |
| Communication protocol | Shimaden protocol, MODBUS ASCII, MODBUS RTU |
Dimensions & Terminal Arrangement
