AirTAC Twin-rod Cylinder TR25X70S
Features
- JIS standard is implemented.
- The non-rotating precision is high and deflection of the end of piston rod is low, which is suitable for precise guide.
- It adopts lengthening type sliding supporting guide. No additional lubricant is needed and it has good performance of guide.
- Mounting holes on three sides facilitates multi-position mounting.
- It is good resistance to bending and twisting moments.
- Except for the axial, each side of the cylinder has installation orifices to provide several installation and fixation ways for the customers
- There are two groups of air intake and outlet at two sides of the cylinder for the actual selection.
- Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.
- Standard configuration of this series has magnet and the type without magnet is not available.
Ordering Code
Specifications:
| Bore size (mm) | 6 | 10 | 16 | 20 | 25 | 32 | |
| Acting type | Double acting | ||||||
| Fluid | Air(to be filtered by 40 u m filter element) | ||||||
| Operating pressure | 0.15-1.0MPa(22-145psi) | ||||||
| Proof pressure | 1.5MPa(215psi) | ||||||
| Temperature ℃ | -20-70 | ||||||
| Speed range mm/s | 30-500 | ||||||
| Adjustable stroke mm | -5-0 | ||||||
| Stroke tolerance | ≤100+1.0 0 >100+1.5 0 | ||||||
| Cushion type | Bumper | ||||||
| Non-rotating tolerance | ±0.20 | ±0.150 | ±0.10 | ||||
| Port size | M5X0.8 | 1/8” | |||||
Stroke:
| Bore size(mm) | Standard stroke (mm) | Max.std stroke |
| 6 | 10 20 30 40 50 | 50 |
| 10 | 10 20 30 40 50 60 70 80 90 100 | 100 |
| 16 | 10 20 30 40 50 60 70 80 90 100 125 150 175 200 | 200 |
| 20 | 10 20 30 40 50 60 70 80 90 100 125 150 175 200 | 200 |
| 25 | 10 20 30 40 50 60 70 80 90 100 125 150 175 200 | 200 |
| 32 | 10 20 30 40 50 60 70 80 90 100 125 150 175 200 | 200 |
Dimensions
