AirTAC Fluid Control Valve 2S200-20
Ordering Code:
Specification:
| Model/ Item | Port size | Orifice size
(Фmm) |
Cv | Valid area or section (mm2) | Weight
(g) |
Max. operating pressure differentia | Proof pressure | |||
| MPa | psi | MPa | psi | |||||||
| 2S030 | -06 | 1/8” | 3.0 | 0.33 | 6.0 | 300 | 1.0 | 150 | 5.0 | 750 |
| -08 | 1/4” | 290 | ||||||||
| 2S050 | -10 | 3/8” | 5.0 | 0.83 | 15.0 | 600 | 1.0 | 150 | 5.0 | 750 |
| -15 | 1/2” | 590 | ||||||||
| 2S150-15 | 1/2” | 15.0 | 5.50 | 100.0 | 675 | Max:1.0
Min:0.05 |
Max:150
Min:10 |
1.5 | 220 | |
| 2S200-20 | 3/4” | 20.0 | 9.50 | 170.0 | 875 | |||||
| 2S250-25 | 1 | 25.0 | 12.50 | 220.0 | 1120 | |||||
| 2S320-32 | 1 1/4” | 35.0 | 23.00 | 420.0 | 2700 | |||||
| 2S400-40 | 11/2” | 40.0 | 31.00 | 560.0 | 3250 | |||||
| 2S500-50 | 2” | 50.0 | 49.00 | 880.0 | 4300 | |||||
Specification of coil:
| Valve type | Coil type | Power type | Frequency (Hz) | Voltage range | Electrical entry | Power Consumption (VA/W) | Insulation | Temp. rise (℃) |
| 2S030 | CDA116
CLA116 |
AC | 50 | ±15% | Terminal (CDA)
Grommet (CLA) |
10.0VA | Class B | 35 |
| 60 | 8.0VA | 30 | ||||||
| DC | – | ±10% | 6.5W | 30 | ||||
| 2S050 | CDA116
CLA116 |
AC | 50 | ±15% | 25.0VA | 60 | ||
| 60 | 22.0VA | 55 | ||||||
| DC | – | ±10% | 10.5W | 40 | ||||
| 2S150
2S200 2S250 |
CDA116
CLA116 |
AC | 50 | ±15% | 10.0VA | 35 | ||
| 60 | 8.0VA | 30 | ||||||
| DC | – | ±10% | 6.5W | 30 | ||||
| 2S320
2S400 2S500 |
CDA170
CLA170 |
AC | 50 | ±15% | 25.0VA | 60 | ||
| 60 | 22.0VA | 55 | ||||||
| DC | – | ±10% | 10.5W | 40 |
Valve’s specification:
| Acting | Internally piloted | ||||
| Initial state | Normally closed | ||||
| Adaptable fluid | Air, Water, Oil | ||||
| Viscosity limit | Under 20CST | ||||
| Ambient and fluid tempetature | Water | Air | Oil | Ambient | |
| Max. | 80 | 90 | 80 | 70 | |
| Min. | 1 | -20 | -10 | -20 | |
Dimensions:
