Batching Controller CB920X
Higher A/D conversion rate up to 200 times/seconds
Higher accuracy of weighing scale-display resolution up to 1/15000
Dual display-showing both gross and net weight simultaneously
The smallest batching controller, panel size is only 96mm x 48mm
Weight indicator integrated with setpoint controller
Provides complete material batching control function
Controls up to 4 different kinds of materials
All setpoints are keyed-in through front panel switches and stored in internal memory
All setpoints values are protected even power down
The batching result can be hold by function setting
Condition for start operation is programmable by function setting
Automatic tare condition is programmable by function setting
Automatic zero return during power up is possible
Tare check cycle is programmable by function setting
Compare check cycle is programmable by function setting
Compare inhibit timer is separated from coarse and fine interchange
Re batch is possible if the actual batched value is less than the set point
Dribble flow control is available for more accurate batching
Easy access plug type connector is used
Coarse feed, fine feed and free fall compensation
Digital calibration method
Software function setting method
Batch report print out through RS232 or RS485
RS232/RS485 input can be used to set setpoint data and system function data
Out of tolerance checking
Discharge control is provide
| Mains Supply |
110V or 220V AC selectable, 50/60Hz |
| Power Consumption |
9VA |
| Line Filter |
Built -in |
| Operating Temperature |
-10°C to 50°C (14°F to 122°F) |
| Relative Humidity |
90%, non-condensing |
| Load Cell Type |
All strain gauge type |
| Load Cell Supply |
10V DC, 150mA max |
| Input Sensitivity |
0.5mV/V to 2mV/V |
| Zero Point Adjustment |
Range from 0.05mV to 15mV |
| Temperature Coefficient |
Less than (0.0008% of reading + 0.3 digitals)/°C |
| Non-Linearity |
Within 0.0067% of full scale |
| Conversion Rate |
200 times/seconds |
| Scale Range |
500 to 100,000 |
| Step Width |
1,2,5,10,20 or 50 |
| Maximum Display Resolution |
15,000 divisions |
| Number of Ingredients |
4 |
| Built in RS232/RS485 Port |
2400, 4800, 9600 or 19200 baud selectable, 7 data bit, Even parity, 1 stop bit |
| Supplied accessories |
Instruction manual |
| Output capacity |
Open collector max 80V 0.3A |
| Dimensions |
96mm (W) x 48mm (H) x 162mm (L) |
