CZ100C Control Module
Features
- The military-grade military-grade single-chip microcomputer with low power consumption and strong anti-interference is adopted.
- Using high temperature digital display function, with infrared remote control function.
- There are two function modes of adjustment and switch, users can set and switch according to their needs; the control mode is flexible, and it can be controlled by switch quantity or by analog quantity (4~20mA).
- Adopt electronic and electrical double limit function, which can effectively ensure the reliable operation of the actuator.
- The motor delay start setting function is adopted. In places with frequent starts, the user can set the delay start time according to the actual situation, which can effectively improve the service life of the actuator.
- With the motor current test function, it can accurately measure the on-load working current of the actuator motor and control it.
Specifications
- Input signal: DC4-20mA or AC220V switch signal
- Output signal: 4~20mA;
- Load resistance: 500Ω
- Dead zone: setting ≥0.6%;
- Zero point adjustment: any position in the whole stroke.
- Range adjustment: 20-100%.
- Basic error: 0.6%—1.0% (can be set).
- Control limit: any position of upper and lower limit, electronic limit: automatically lock the working area.
- Opening detection: precision conductive potentiometer.
- Feedback signal calibration: Adjustable upper and lower limit feedback deviation is less than 0.5%.
- Power supply: AC220V -15%～+10% 50Hz
