Fluke T5-600 Electrical tester

$155.00

Fluke T5-600 Voltage, Continuity and Current Tester

Fluke T5-600 Electrical tester

Introduction:

The T5-600 Voltage Continuity and Current Tester is a versatile troubleshooting tool for up to 600 V environments. Use it to check voltage, continuity, and current with one compact tool. Just select volts, ohms, or current and the tester does the rest. Its OpenJaw™ current measurement lets you check current up to 100 A without breaking the circuit.

Detachable SlimReach™ test probes are customized for national electrical standards. Plus, its tough test leads accept optional accessories such as clips and specialty probes. The test leads stow neatly in the back of the tester, making it easy to carry in your tool pouch. Add the optional H5 holster and you can clip the T5-1000 onto your belt. For higher voltage applications check out the Fluke T5-1000.

Other useful capabilities:

  • Features a compact design with handy probe storage
  • Withstands a 10 ft. (3 m) drop
  • Includes detachable SlimReach™ probe tips that are customized for national electrical standards
  • Can stay connected much longer than solenoid type testers
  • Offers Auto-off mode to conserve battery life
  • Fits into an optional holster that attaches to a belt and neatly stows test leads
Specifications
Jaw opening 12.9 mm (0.5 in)
Max wire size 1/0 THHN Cable
Current range AC rms 0 to 100.0 A
Accuracy AC current (50/60 Hz) 3% ± 3 counts
AC response Averaging
Voltage range AC/DC 0 to 600 V
Voltage accuracy AC  1.5% ± 2 counts

DC  1% ± 1 count

Resistance range 0 to 1000 Ω
Continuity beeper threshold On at < 25 Ω, off at > 400 Ω
Volts indicator LED threshold Guaranteed on by 30 V AC
Environmental Specifications
Operating temperature -10°C to 50°C
Storage temperature -30°C to 60°C
Humidity (without condensation) 0% to 95% (5°C to 30°C);
0% to 75% (30°C to 40°C);
0% to 45% (40°C to 50°C)
Dust/water resistance Yes
Operating altitude 2000 meters max
Temperature coefficient 0.1 x (specified accuracy)/°C (< 18°C or > 28°C)
Safety Specifications
Measurement Category IEC 61010-2-032, IEC61010-2-033: CAT III 600 V, 100 A ac
Agency approvals CSA, TUV
Maximum voltage 600 V between any terminal and earth ground
Mechanical and General Specifications
Size 30.5 x 51 x 203 mm
Weight 300 g
Warranty Two-years
Battery life 200 hour zinc chloride, 400 hour alkaline
Battery type 2 x AA
Low battery indicator Yes
Current sensor opening 12.9 mm
Calibration cycle 1 year
Test leads Type Heavy duty, flexible leads rated for 1000 V use.

Field replaceable leads terminate in male shrouded banana plugs

Probes One red, one black.

Detachable Slim-Reach™ probe tips

Styles TP1 Slim Reach™ Test Probes

Includes:

  • 600 V Voltage, continuity and current tester
  • 4 mm detachable probes
  • Instruction sheet
Weight 0.3 kg
Dimensions 203 × 31 × 51 mm
Brand

Suppliers