GP20 Traversing Drive

$117.00

GP20-A Traversing Drive/ GP20-B Traversing Drive/ GP20-C Traversing Drive

GP15-60 Traversing Drive

Application Scope

  1. Widely used in wire and cable, textile, plastic products, rope production and other industries, evenly lined into a loop of fried wire and rewind into a disk.
  2. The wire passes through the wire wheel or the wire roller on the traversing drive, adjusts the wire pitch as required, and evenly and reciprocally wound onto the take-up reel.
  3. The opening and the pitch of the cable are within the specified range, and can be adjusted arbitrarily to meet the process requirements of the collection and distribution line.

Advantages

  1. Stepless speed regulation: The receiving shaft transmits a certain speed to the plain shaft. Without changing the speed of the plain shaft, just dialing the indicator on the dial can adjust the speed of the coil reciprocating motion in the direction of the rod axis. The value can be set from 0 to the maximum pitch.
  2. Instantaneous commutation: There is no need to change the direction of rotation of the plain shaft. When the movable arm reversing wheel hits the block, the direction of travel of the cable aligner can be changed instantaneously, and the commutation time is not less than 1 second.
  3. High-speed cable: The linear motion of the traversing drive on the plain shaft can reach 4 m / s, which can meet the requirements of high cable speed and frequent commutation.
  4. Release device: Loosen the release lever without stopping the machine, and hold the traversing drive at any position on the plain shaft. (For example, the cable starts working from the end)

Model Description

A Series Traversing Drive : main unit

B Series Traversing Drive: main unit + wire roller or wire wheel

C Series Traversing Drive: main unit + wire roller or wire wheel + plain shaft + Bracket Plate + screw rod + guide rail = Assembly

GP Traversing Drive A.B.C SERIES

Main Parameters and Assembling Diagram

GP Traversing Drive A.B SERIES

Model AXBXC D E F G H I J K M S N 4-M Thrust

N

Weight

Kg

Travel Pitch
GP15 90X50X66 14 38 18 27 48 30 34 4-M6 100 1.2 0.1-11
GP20 123X71X85 150 30-60 25 14 40 18 35 62 50 40 42 4-M6 135 2.5 0.1-16
GP30 141X87X105 150 30-60 25 14 46 20 65 76 50 60 62 4-M6 265 8.5 0.1-25
GP40 165X106X121 250 30-70 32 26 56 28 70 82 60 60 62 4-M8 420 11.2 0.5-32
GP50 220X132X160 400 40-95 38 35 70 36 90 116 85 90 104 4-M8 700 33 0.5-40
GP60 240X150X182 460 40-120 38 35 70 36 90 130 90 104 110 4-M8 1200 42 0.5-48

C Series Parameters and Assembling Diagram

C Series Traversing Drive

Model d2 L1 L2 L3 L4 L5 L6 H1 H2 Md Key Groove (W X D)
GP15 Ф15 450 14 70 40 75 15 M8 5X2.5
GP20 Ф14 450 14 102 40 41 30 90 15 2-M8 5X2.5
GP30 Ф20 500 16 136 60 54 40 105 20 2-M10 6X3
GP40 Ф25 800 20 148 80 47 40 117 25 2-M10 8X4
GP50 Ф35 1000 22 220 130 58 40 160 25 2-M10 10X5
GP60 Ф45 1200 25 220 150 58 40 180 25 2-M10 10X5