JR slip ring motor
JR Wound Rotor Motor
JR motor

JR137-6 Slip Ring Induction Motor

JR137-6 Wound Rotor Three-phase Asynchronous Motor 280KW/ 380V

SKU: JR137-6 Categories: , Tags: , , ,

JR Series Wound Rotor Three-phase Asynchronous Motor

Introduction:

JR series motor is wound rotor three-phase asynchronous motor. It meet the standard of JB 564-64 technical requirements. JR series must insert starting rheostat in rotor circuit in advance, and can’t be started directly by short circuiting the rotor winding. The basic mounting mode of this type is horizontal installation with bottom foot. It should be connected with the driven machine by coupler device. JR motor adopted a double – sided radial ventilation system and antifriction bearing. By the side of shaft extension end, the outlet box is on the right of the frame. It can be reduced power running for long time in condition of reduce the torque.

Application:

Slip ring lifting, Ventilator, compressor, water pump, crusher, ball mill, stock-removing machine, transport machine and other machinery.

It can be prime mover of industries like coal mine, mechanical industry,  power station and different kinds of manufacturing and mining industries.

Operation Condition:

Ambient temperature: -15°C≤θ≤40°C

Altitude: not exceed 1000m

Rated voltage:380V

Rated frequency: 50Hz, 60Hz

Protection: the main body of the motor is IP54, but

The terminal box reaches IP55

Insulation class: F,H

Cooling method: IC0141

Duty: S1(continuous)

The Meaning of the Models:

JR 115 -6

JR— Wound rotor asynchronous motors

11—Center height of frame

5—Core Length

6—Pole number

Note: JR series motor has two types: brushes lifting with short-circuiting device and brushless lifting with short-circuiting device.

Technical Parameter: 

Type Rated Power

(KW)

 Voltage

(V)

 Rated Value Max torque

————

Rated torque

 Rotor Voltage

(V)

 Rotor Current(A) Rotor Flywheel Moment

(N·m2)

 Weight

(kg)
Speed Stator current Efficiency Power factor
r/min A % cosφ
JR114-4 115 380 1450 212 91 0.904 2 173 433 160 1035
JR115-4 135 1460 246 92.1 0.904 2.33 210 408 180 1130
JR116-4 155 1460 278 92.7 0.913 2.28 238 412 200 1200
JR117-4 180 1460 321 93.1 0.911 2.45 275 409 220 1270
JR126-4 225 1470 405 93.1 0.907 2.2 291 488 370 1660
JR127-4 260 1472 461 93 0.92 2.18 334 493 400 1760
JR128-4 300 1475 530 93.9 0.917 2.37 390 482 440 1890
JR136-4 220 6000 1475 26 91.7 0.894 1.97 307 457 590 2110
JR137-4 260 1480 30.3 92.3 0.897 1.92 346 481 630 2210
JR138-4 300 1478 35 92.4 0.9 1.96 398 483 710 2320
JR147-4 360 1479 41 93.1 0.904 2.68 558 406 850 3000
JR148-4 440 1475 49 93.44 0.92 2.68 634 410 1000 3300
JR1410-4 500 1482 55.5 94.1 0.92 2.44 717 420 1200 3600
JR158-4 680 1480 77.8 93.8 0.87 2.7 722 586 1700 4500
JR 1510-4 850 1483 95.9 94.3 0.904 2.5 803 657 2100 4700
JR 1512-4 1050 1480 118 94.4 0.9 2.3 1035 630 2500 5450
JR115-6 75 380 965 142 90.3 0.89 1.98 127 382 210 1025
JR 116-6 95 970 177 91.74 0.891 2.33 162 371 240 1115
JR 117-6 115 973 213 92.1 0.893 2.32 191 381 260 1170
JR125-6 130 976 245 91.4 0.882 1.87 187 445 400 1450
JR 126-6 155 977 294 91.1 0.873 1.85 219 455 440 1530
JR 127-6 185 977 334 92.8 0.907 2.27 366 319 490 1560
JR 128-6 215 979 385 93.3 0.908 2.44 424 317 540 1630
JR136-6 240 977 436 93 0.905 1.85 407 376 760 1970
JR 137-6 280 981 507 93.14 0.907 2.15 490 360 840 2030
JR148-6 310 6000 983 36.8 91.99 0.88 2.2 505 374 1650 3360
JR 1410-6 380 983 44.7 92.5 0.88 2.1 590 391 1850 3630
JR 157-6 460 985 54 92 0.87 2 568 517 2300 3700
JR 158-6 550 985 64 92.5 0.87 2 618 570 2600 4000
JR 1510-6 650 985 75 93 0.87 2.1 741 560 3300 4500
JR 1512-6 780 985 89 93.5 0.88 2.2 862 570 4000 4750
JR115-8 60 380 720 120 89.38 0.846 2.59 172 230 250 980
JR 116-8 70 723 137 90.27 0.856 2.57 199 225 280 1060
JR 117-8 80 723 154 90.96 0.869 2.45 222 230 310 1135
JR125-8 95 725 183 90.55 0.867 1.89 213 292 450 1380
JR126-8 110 726 212 90.75 0.866 1.84 243 294 510 1550
JR127-8 130 728 242 92.15 0.88 2.04 256 324 570 1500
JR128-8 155 732 291 92.54 0.875 2.3 309 316 640 1600
JR136-8 180 735 345 92.25 0.858 2 354 323 770 1850
JR137-8 210 734 400 93 0.86 1.84 394 341 850 1940
JR138-8 245 734 453 93.1 0.86 1.8 425 365 850 2060
JR147-8 200 6000 738 25.7 91.6 0.818 2.5 406 299 1500 3090
JR148-8 240 738 30.6 92 0.821 2.43 457 319 1650 3300
JR1410-8 280 740 35.7 92.3 0.818 2.55 550 309 1850 3600
JR157-8 320 739 39 92.5 0.86 2.2 509 395 2300 3700
JR158-8 380 738 45.6 93 0.86 2.22 547 436 2600 4000
JR1510-8 475 738 56 93.28 0.856 2.031 641 468 3300 4500
JR1512-8 570 738 66.9 93.72 0.86 1.981 698 514 4000 4750
JR115-10 45 380 577 97 88 0.8 2.21 117 252 260 950
JR116-10 55 577 116 89 0.805 2.17 140 256 280 1040
JR117-10 65 577 135 89 0.81 2.16 159 263 310 1110
JR125-10 80 574 164 90.15 0.817 1.96 168 309 460 1350
JR126-10 95 573 193 90.44 0.825 1.83 188 326 520 1440
JR127-10 115 575 233 90.9 0.82 1.92 225 328 580 1590
JR128-10 130 575 261 91.14 0.826 1.83 251 333 650 1720
JR137-10 155 583 307 91.45 0.854 2 354 280 930 1920
JR138-10 180 583 346 91.6 0.86 1.8 387 300 1050 2090
JR1410-10 200 6000 590 27 90.5 0.8 2.7 511 248 2100 3300
JR157-10 260 588 33.5 91.2 0.81 2.1 412 406 3000 3700
JR158-10 310 585 39.5 91.7 0.81 2 442 454 3400 4000
JR1510-10 400 585 50.3 92 0.82 2.2 554 467 4200 4500
JR1512-10 480 585 60 92.9 0.81 2.3 602 512 5100 4750
JR1510-12 280 490 38 91.4 0.77 2.2 478 380 4200 4500
JR1512-12 330 490 44 91.7 0.78 2.1 515 413 5100 4750

Dimension:

JR slip ring induction motor Dimensions

Related Products

mech-mall

JR148-4 Slip Ring Induction Motor

mech-mall

JR126-4 Slip Ring Induction Motor

mech-mall

JR1410-4 Slip Ring Induction Motor

mech-mall

JR137-4 Slip Ring Induction Motor

mech-mall

JR115-6 Slip Ring Induction Motor

mech-mall

JR115-4 Slip Ring Induction Motor