PAC01A-3-60A Single-phase Power Regulator

PAC01A Series Single-phase Passive Voltage Regulator

Introduction:

The PAC01A uses a 4-20 mA control signal as the power supply. It is beautiful with European-style safety and dustproof structure and power terminals safety cover. Red and blue LED lights make the working status much more clear. The blade type heat sink is small and light, but the heat dissipation efficiency is higher than that of the ordinary heat sink by 30%. As an option, the PAC01 is equipped with PWM tuning and heater disconnection alarm HB. Other functions include: auxiliary voltage limit, power-on slow start, slow turn-off, heat sink over temperature, power failure alarm, and can be widely used in resistive or inductive loads in various fields of industry.

Main Specifications:

1.4 ~ 20mA input: Receive impedance 500Ω ~ 1.5K; pressure regulation resolution: 0.1%.

2. Load power supply: 50Hz single phase 110VAC/220VAC/380VAC phase shift range: 0~170°
3. Synchronous power supply: 110VAC/220VAC/380VAC, see signage
4. External voltage adjustment: 10K with dial potentiometer Adjustment range 0~100%.
5. Slow start, slow stop: Start and stop switch control slow start, slow stop time is fixed at 15 seconds. When there is no start/stop switch control, the first power-on automatically starts slowly.

6.80 °C over-temperature protection: The heat sink temperature is greater than 80 °C ± 3 °C. Prohibit the output and alarm. Release: After the fault is removed, re-power on.

7. Current capacity: 40A, 60A, 80A, 120A, 150A AC
8. Alarm output: Photoelectric isolation OC gate output, isolation voltage 1500V (5~24VDC external power supply).

Model Definition:

Technical Parameters:

Working Principle and Wiring Diagram:

Dimensions：