SICOMA Grease Pump
Lubrication is one of the core parts of a mixer. Its operation directly affects the mixer’s efficiency and
life. To make your mixer to operate safely and efficiently, please ensure proper maintenance and
operation of the lubrication system.
OPERATION
This is automatic lubricating system. The lubricating pump is set to work synchronous with mixer
before delivery and is controlled by relay, which stops for 10 min after 5 min working to save grease
consumption. Under normal working condition, user only need to periodically check and fill the grease
and doesn’t need to operate manually.
◆Check
Check every day if the grease is lubricating the seal ends. Procedure is as follows:
There is one spare grease nozzle on the 4 seal ends. Press the nozzle core by nail. If there is grease
coming out, the pump is working properly.
If there is grease lack, please check if the seal end pipe is unobstructed. Check again if the dividing
valve is blocked. Finally, check if the valve cores are working properly.
Solutions: If the grease pump system is broken or in repair while the mixer needs to be working, feed
the grease from the 4 nozzles by a grease gun. (≥2 times a day)
TECHNIC DATA
◆ PUMP
Working Temp……………………………………………….……………－25℃～70℃
Outlet Qty…………………………………………………………………………….…4
Tank Volume…………….……………………………………………….…………… 4L
Oil Feeding………………………………………………….…Through Oil Feeding Filter
Lubricant……………………………………………………..……Maximum Grade NLGI 2
Protection……………..…………………………………IP6K 9K acc. To DIN 40050 T9
◆ MOTOR
Working Voltage.…………………………………………………………380VAC/50Hz
Maximum Output Power.……………………………………………………………90W
Rotation Speed,,,…………………………………………………………………1350rpm
Notice: The motor is intermittent rotating.
◆ PUMP CORE
Lubricant Output…….………………………………………………………6.2cm3/min
Maximum Working Pressure……………………………………………………150bar
Connection Cable ..……………………………………………………………… G 1/4
Pipe Diameter…………………..……………………………………………………φ6mm
