Fluke 1587 Insulation Multimeter
Introduction:
The Fluke 1587 FC, 1587, 1587T, and 1577 are battery-powered, true-RMS insulation multimeters (the Product or Meter) with a 6000-count display. Although this manual describes the operation of all models, all illustrations and examples assume use of Model 1587 FC.
The Meter measures or tests:
- AC / DC voltage and current
- Resistance
- Continuity
- Insulation resistance
- Voltage and current frequency
- Diodes (all 1587 models)
- Temperature (all 1587 models)
- Capacitance (all 1587 models)
The 1587 FC supports the Fluke Connect™ Wireless System (may not be available in all regions). Fluke Connect™ is a system that wirelessly connects your Meter with an app on your smartphone or tablet. The app shows the Meter measurement on your smartphone or tablet screen. You can save these measurements with Fluke Connect™ to share with your team.
General Specifications
| Maximum Voltage Applied to
any Terminal and Common |
1000 V |
| Fuse Protection for mA input | 0.44 A, 1000 V, IR 10 kA |
| Batteries | Four AA batteries (NEDA 15A or IEC LR6) |
| Size | 5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L) |
| Weight | 550 g (1.2 lb) |
| Altitude | Operating: 2000 m
Storage: 12,000 m |
| Over-Range Capability | 110 % of range except for capacitance which is 100 % |
| Frequency Overload Protection | ≤10 7 V Hz |
| Storage Temperature | -40 °C to 60 °C (-40 °F to 140 °F) |
| Operating Temperature | -20 °C to 55 °C (-4 °F to 131 °F) |
| Temperature Coefficient | 0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F) |
| Relative Humidity | Noncondensing
0 % to 95 % @ 10 °C to 30 °C (50 °F to 86 °F) 0 % to 75 % @ 30 °C to 40 °C (86 °F to 104 °F) 0 % to 40 % @ 40 °C to 55 °C (104 °F to 131 °F) |
| Enclosure Protection | IEC 60529: IP40 (non-operating) |
| Safety | IEC 61010-1: Pollution Degree 2
CAT IV 600 V/ CAT III 1000 V |
| Wireless Radio with Adapter | Frequency Range: 2402 MHz to 2480 MHz
Output Power: <10 Mw Radio Frequency Certification: FCC: T68-FBLE, IC: 6627A-FBLE |
Electrical Specifications
AC Voltage Measurement
Accuracy (all 1587 models)
| Range | Resolution | 50 Hz to 60 Hz
± ±(% of Rdg + Counts) |
60 Hz to 5000 Hz
± ±(% of Rdg + Counts) |
| 600.0 mV | 0.1 mV | ± (1 % + 3) | ± (2 % + 3) |
| 6.000 V | 0.001 V | ± (1 % + 3) | ± (2 % + 3) |
| 60.00 V | 0.01 V | ± (1 % + 3) | ± (2 % + 3) |
| 600.0 V | 0.1 V | ± (1 % + 3) | ± (2 % + 3) |
| 1000 V | 1 V | ± (2 % + 3) | ± (2 % + 3) |
Low-Pass Filter Voltage (all 1587 models)
| Range | Resolution | 50 Hz to 60 Hz
± ±(% of Rdg + Counts) |
60 Hz to 5000 Hz
± ±(% of Rdg + Counts) |
| 600.0 mV | 0.1 mV | ± (1 % + 3) | +(2 % + 3)
-(6 % – 3) |
| 6.000 V | 0.001 V | ± (1 % + 3) | +(2 % + 3)
-(6 % – 3) |
| 60.00 V | 0.01 V | ± (1 % + 3) | +(2 % + 3)
-(6 % – 3) |
| 600.0 V | 0.1 V | ± (1 % + 3) | +(2 % + 3)
-(6 % – 3) |
| 1000 V | 1 V | ± (2 % + 3) | +(2 % + 3)
-(6 % – 3) |
1577 Accuracy
| Range | Resolution | 50 Hz to 60 Hz
± ±(% of Rdg + Counts) |
| 600.0 mV | 0.1 mV | +(2 % + 3) |
| 6.000 V | 0.001 V | +(2 % + 3) |
| 60.00 V | 0.01 V | +(2 % + 3) |
| 600.0 V | 0.1 V | +(2 % + 3) |
| 1000 V | 1 V | +(2 % + 3) |
| Input Impedance | 10 MΩ (nominal), <100 pF, ac-coupled | |
| Common Mode Rejection Ratio
(1 kΩ unbalanced) |
>60 dB at dc, 50 or 60 Hz |
DC Voltage Measurement
| Range | Resolution | Accuracy 1587 and 1587T [1]
± ±(% of Rdg + Counts) |
Accuracy 1577 [1]
± ±(% of Rdg + Counts) |
| 6.000 V dc | 0.001 V | ±(0.09 % + 2) | ±(0.2 % + 2) |
| 60.00 V dc | 0.01 V | ±(0.09 % + 2) | ±(0.2 % + 2) |
| 600.0 V dc | 0.1 V | ±(0.09 % + 2) | ±(0.2 % + 2) |
| 1000 V dc | 1 V | ±(0.09 % + 2) | ±(0.2 % + 2) |
| Input Impedance | 10 MΩ (nominal), <100 pF | ||
| Normal Mode Rejection Ratio | >60 dB @ 50 Hz or 60 Hz | ||
| Common Mode Rejection Ratio | >120 dB @ dc, 50 Hz or 60 Hz (1 kΩ unbalance) |
DC Millivolts Measurement
| Range | Resolution | Accuracy all 1587 models
±(% of Rdg + Counts) |
Accuracy 1577 [1]
± ±(% of Rdg + Counts) |
| 600.0 mV dc | 0. 1 mV | ±(0.09 % + 2) | ±(0.2 % + 2) |
DC and AC Current Measurement
| Range | Resolution | Accuracy all 1587 models
± (% of Rdg+Counts) |
Accuracy 1577
± (% of Rdg+Counts) |
Burden Voltage
(Typical) |
|
| AC
45 Hz to 1000 Hz |
400 mA | 0.1 mA | ±(1.5 % + 2) | ±(2 % + 2) | 2 mV/mA |
| 60 mA | 0.01 mA | ±(1.5 % + 2) | ±(2 % + 2) | 2 mV/mA | |
| DC | 400 mA | 0.1 mA | ±(0.2 % + 2) | ±(1.0 % + 2) | 2 mV/mA |
| 60 mA | 0.01 mA | ±(0.2 % + 2) | ±(1.0 % + 2) | 2 mV/mA | |
| Overload | 600 mA for 2 minutes maximum | ||||
| Fuse Protection for mA Input | 0.44 mA, 1000 V, IR 10 kA |
Ohms Measurement
| Range | Resolution | Accuracy all 1587 models
± (% of Rdg+Counts) |
Accuracy 1577
± (% of Rdg+Counts) |
| 600.0 Ω | 0.1 Ω | ±(0.9 % + 2) | ±(1.2 % + 2) |
| 6.000 kΩ | 0.001 kΩ | ±(0.9 % + 2) | ±(1.2 % + 2) |
| 60.00 kΩ | 0.01 kΩ | ±(0.9 % + 2) | ±(1.2 % + 2) |
| 600.0 kΩ | 0.1 KΩ | ±(0.9 % + 2) | ±(1.2 % + 2) |
| 6.000 MΩ | 0.001 MΩ | ±(0.9 % + 2) | ±(1.2 % + 2) |
| 50.0 MΩ | 0.01 MΩ | ±(1.5 % + 3) | ±(2.0 % + 3) |
| Overload Protection | 1000 V rms or dc | ||
| Open Circuit Test Voltage | <8.0 V dc | ||
| Short Circuit Current | <1.1 mA |
Diode Test (all 1587 models)
| Diode Test Indication | Display voltage drop: 0.6 V at 1.0 mA nominal test current: |
| Accuracy | ±(2 % + 3) |
Continuity Test
| Continuity Indication | Continuous audible tone for test resistance below 25 Ω and off above 100 Ω. Maximum Reading; 1000 Ω |
| Open Circuit Voltage | <8.0 V |
| Short Circuit Current | 1.0 mA typical |
| Overload Protection | 1000 V rms |
| Response Time | >1 m sec |
Frequency Measurement (all 1587 models)
| Range | Resolution | Accuracy all 1587 models
± (% of Rdg+Counts) |
| 99.99 Hz | 0.01 Hz | ±(0.1 % + 1) |
| 999.9 Hz | 0.1 Hz | ±(0.1 % + 1) |
| 9.999 kHz | 0.001 kHz | ±(0.1 % + 1) |
| 99.99 kHz | 0.01 kHz | ±(0.1 % + 1) |
Frequency Counter Sensitivity (all 1587 models)
| Input Range | V ac Sensitivity
5 Hz to 20 kHz |
V ac Sensitivity
20 kHz to 100 kHz |
DC Trigger Levels [1] to 20 kHz |
| 600.0 mV ac | 100.0 mV | 150.0 mV | na |
| 6.0 V | 1.0 V | 1.5 V | -400.0 mV and 2.5 V |
| 60.0 V | 10.0 V | 36.0 V | 1.2 V and 4.0 V |
| 600.0 V | 100.0 V | – | 12.0 V and 40.0 V |
| 1000.0 V | 300.0 V | – | 12.0 V and 40.0 V |
Capacitance (all 1587 models)
| Range | Resolution | Accuracy
± (% of Rdg+Counts) |
| 1000 nF | 1 nF | ±(1.2 % + 2) |
| 10.00 μF | 0.01 μF | ±(1.2 % + 2) |
| 100.0 μF | 0.1 μF | ±(1.2 % ±90 counts) |
| 9999 μF | 1 μF | ±(1.2 % ±90 counts) |
Temperature Measurement (all 1587 models)
| Range | Resolution | Accuracy
± (% of Rdg+Counts) |
| -40 ° C to 537 ° C | 0.1 °C | ±(1 % + 10 counts) |
| -40 ° F to 998 ° F | 0.1 °F | ±(1 % + 18 counts) |
Insulation Specifications
| Measurement Range | Model 1587, 1587 FC: 0.01 MΩ to 2 GΩ
Model 1577: 0.1 MΩ to 600 MΩ Model 1587T: 0.01 MΩ to 100 MΩ |
| Test Voltages | Model 1587, 1587 FC: 50, 100, 250, 500, 1000 V
Model 1577: 500, 1000 V Model 1587T: 50, 100 V+ |
| Test Voltage Accuracy | +20 %, -0 % |
| Short-Circuit Test Current | 1 mA nominal |
| Auto Discharge | Discharge time <0.5 second for C = 1 μF or less |
| Live Circuit Detection | Inhibit test if terminal voltage > 30 V prior to initialization of test |
| Maximum Capacitive Load | Operable with up to 1 μF load |
Model 1587/1587 FC
| Output Voltage | Display Range | Resolution | Test Current | Resistance Accuracy
± ±(% of Rdg + Counts) |
| 50 V
(0 % to +20 %) |
0.01 to 6.00 MΩ
6.0 to 50.0 MΩ |
0.01 MΩ
0.1 MΩ |
1 mA @ 50 kΩ | ±(3 % + 5 counts) |
| 100 V
(0 % to +20 %) |
0.01to 6.00 MΩ
6.0 to 60.0 MΩ 60 to 100 MΩ |
0.01 MΩ
0.1 MΩ 1 MΩ |
1 mA @ 100 kΩ | ±(3 % + 5 counts) |
| 250 V
(0 % to +20 %) |
0.1 to 60.0 MΩ
60 to 250 MΩ |
0.1 MΩ
1 MΩ |
1 mA @ 250 kΩ | ±(1.5 % + 5 counts) |
| 500 V
(0 % to +20 %) |
0.2 to 60.0 MΩ
60 to 500 MΩ |
0.1 MΩ
1 MΩ |
1 mA @ 500 kΩ | ±(1.5 % + 5 counts) |
| 1000 V
(0 % to +20 %) |
0.1 to 60.0 MΩ
60 to 600 MΩ 0.6 to 2.0 GΩ |
0.1 MΩ
1 MΩ 100 MΩ |
1 mA @ 1 MΩ | ±(1.5 % + 5 counts)
±(1.5 % + 5 counts) ±(10 % + 3 counts) |
Model 1577
| Output Voltage | Display Range | Resolution | Test Current | Resistance Accuracy
± ±(% of Rdg + Counts) |
| 500 V
(0 % to +20 %) |
0.1to 60.0 MΩ
60 to 500 MΩ |
0.1 MΩ
1 MΩ |
1 mA @ 500 kΩ | ±(1.5 % + 5 counts) |
| 1000
(0 % to +20 %) |
0.1 to 60.0 MΩ
60 to 600 MΩ |
0.1 MΩ
1 MΩ |
1 mA @ 1 MΩ | ±(2.0 % + 5 counts) |
Model 1587T
| Output Voltage | Display Range | Resolution | Test Current | Resistance Accuracy
± ±(% of Rdg + Counts) |
| 50 V
(0% to +20 %) |
0.01to 6.00 MΩ
6.0 to 50.0 MΩ |
0.1 MΩ
1 MΩ |
1 mA @ 50 kΩ | ±(3% + 5 counts) |
| 100V
(0 % to +20 %) |
0.01 to 6.00 MΩ
6.0 to 60.0 MΩ 60 to 100 MΩ |
0.01 MΩ
0.1 MΩ 1 MΩ |
1 mA @ 100 MΩ | ±(3 % + 5 counts) |
Model 1587C FC
| Output Voltage | Display Range | Resolution | Test Current | Resistance Accuracy
± ±(% of Rdg + Counts) |
| 50 V
(-10 % to +10 %) |
0.02 to 6.00 MΩ
6.0 to 50.0 MΩ |
0.01 MΩ
0.1 MΩ |
1 mA @ 50 kΩ | ±(3 % + 5 counts) |
| 100 V
(-10 % to +10 %) |
0.01to 6.00 MΩ | 0.01 MΩ | 1 mA @ 100 kΩ | ±(3 % + 5 counts) |
| 250 V
(-10 % to +10 %) |
0.1to 60.0 MΩ
60 to 250 MΩ |
0.1 MΩ
1 MΩ |
1 mA @ 250 kΩ | ±(1.5 % + 5 counts) |
| 500 V
(0 % to +20 %) |
0.1to 60.0 MΩ
60 to 500 MΩ |
0.1 MΩ
1 MΩ |
1 mA @ 500 kΩ | ±(1.5 % + 5 counts) |
| 1000
(0% to +20 %) |
0.1 to 60.0 MΩ
60 to 600 MΩ 0.6 to 2.0 GΩ |
0.1 MΩ
1 MΩ 100 MΩ |
1 mA @ 1 MΩ | ±(1.5 % + 5 counts)
±(1.5 % + 5 counts) ±(10 % + 3 counts) |
