Fluke 375 FC True-RMS AC/DC Clamp Meter
Introduction：
The Fluke 375 FC is part of the Fluke Connect family of wireless test tools. Now you can:
Log and trend measurements to pinpoint intermittent faults
Transmit results wirelessly via Fluke Connect® Measurements app
Create and send reports right from the field
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices
The Fluke 375 FC is the direct replacement for the Fluke 375 Clamp Meter.
| General Specifications | |||
| AC Current via Jaw | |||
| Range | 600.0 A | ||
| Resolution | 0.1 A | ||
| Accuracy | 2% ±5 digits (10 Hz to 100 Hz)
2.5% ±5 digits (100-500 Hz) |
||
| Crest Factor (50 Hz/60 Hz) | 3 @ 500 A
2.5 @ 600 A Add 2% for C.F. >2 |
||
| AC Current via Flexible Current Probe | |||
| Range | 2500 A | ||
| Resolution | 0.1 A (≤ 600 A)
1 A (≤ 2.500 A) |
||
| Accuracy | 3% ±5 digits (5 – 500 Hz) | ||
| Crest Factor (50/60Hz) | 3.0 at 1100 A
2.5 at 1400 A 1.42 at 2500 A Add 2% for C.F. > 2 |
||
| Position Sensitivity | |||
| i2500-10 Flex | i2500-18 Flex | ||
| A | |||
| Distance from Optimum | 0.5 in (12.7 mm) | 1.4 in (35.6 mm) | |
| Error | ±0.5 % | ±0.5 % | |
| B | |||
| Distance from Optimum | 0.8 in (20.3 mm) | 2.0 in (50.8 mm) | |
| Error | ±1.0 % | ±1.0 % | |
| C | |||
| Distance from Optimum | 1.4 in (35.6 mm) | 2.5 in (63.5 mm) | |
| Error | ±2.0 % | ±2.0 % | |
| Measurement uncertainty assumes centralized primary conductor at optimum position, no external electrical or magnetic field, and within operating temperature range. | |||
| DC Current | |||
| Range | 600.0 A | ||
| Resolution | 0.1 A | ||
| Accuracy | 2% ±5 digits | ||
| AC Voltage | |||
| Range | 1000 V | ||
| Resolution | 0.1 V (≤600.0 V)
1 V (≤1000 V) |
||
| Accuracy | 1.5% ±5 digits (20 Hz to 500 Hz) | ||
| DC Voltage | |||
| Range | 1000 V | ||
| Resolution | 0.1 V (≤600.0 V)
1 V (≤1000 V) |
||
| Accuracy | 1% ±5 digits | ||
| mV dc | |||
| Range | 500.0 mV | ||
| Resolution | 0.1 mV | ||
| Accuracy | 1% ±5 digits | ||
| Frequency via Jaw | |||
| Range | 5.0 Hz to 500.0 Hz | ||
| Resolution | 0.1 Hz | ||
| Accuracy | 0.5% ±5 digits | ||
| Trigger level | 5 Hz to 10 Hz, ≥10 A
10 Hz to 100 Hz, ≥5 A 100 Hz to 500 Hz, ≥10 A |
||
| Frequency via Flexible Current Probe | |||
| Range | 5.0 Hz to 500.0 Hz | ||
| Resolution | 0.1 Hz | ||
| Accuracy | 0.5% ±5 digits | ||
| Trigger level | 5 Hz to 20 Hz, ≥25 A
20 Hz to 100 Hz, ≥20 A 100 Hz to 500 Hz, ≥25 A |
||
| Resistance | |||
| Range | 60 kΩ | ||
| Resolution | 0.1 Ω (≤600 Ω)
1 Ω (≤6000 Ω) 10 Ω (≤60 kΩ) |
||
| Accuracy | 1% ±5 digits | ||
| Capacitance | |||
| Range | 1000 μF | ||
| Resolution | 0.1 μF (≤ 100 μF)
1 μ F (≤ 1000 μF) |
||
| Accuracy | 1% ±4 digits | ||
| Mechanical Specifications | |||
| Maximum voltage between any terminal and earth ground | 1000 V | ||
| Batteries | 2 AA, NEDA 15A, IEC LR6 | ||
| Operating temperature | -10 °C to +50 °C | ||
| Storage temperature | -40 °C to +60 °C | ||
| Operating humidity – non-condensing (< 10°C) |
≤90% RH (at 10 °C to 30 °C)
≤75% RH (at 30 °C to 40 °C) ≤45% RH (at 40 °C to 50 °C) |
||
| Operating altitude | 2000 m | ||
| Storage altitude | 12,000 m | ||
| Size (L x W x H) | 249 x 85 x 45 mm | ||
| Weight | 395 g | ||
| Jaw opening | 34 mm | ||
| Flexible current probe diameter | 7.5 mm | ||
| Flexible current probe cable length (head to electronics connector) |
1.8 m | ||
| Safety | IEC 61010-1, Pollution Degree 2
IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V IEC 61010-2-033:CAT III 1000 V / CAT IV 600 V |
||
| IP rating | IEC 60529: IP30, non-operating | ||
| Radio Frequency Certification FCC ID | T68-FBLE IC:6627A-FBLE | ||
Includes:
- 18-inch iFlex® Flexible Current Probe
- TPAK magnetic hanging strap
- Soft carrying case
- TL75 test leads
- Two AA Alkaline batteries
- Coated instruction card
- Safety information sheet
