Fluke 902 FC HVAC True-RMS Clamp Meter
Introduction:
The Fluke 902 FC is a hand-held battery-operated HVAC True-rms Clamp Meter (“the Meter”) that measures:
- AC current
- DC current (up to 200 µA for flame rod testing through input terminals)
- AC and DC voltages
- Capacitance
- Resistance
- Continuity
- Temperature in both Celsius (°C) and Fahrenheit (°F)
The Meter comes with:
- Two AA alkaline batteries (installed)
- Users Manual
- Soft carrying case
- TL75 Test Leads (one pair)
- 80BK Integrated DMM Temperature Probe
- Fluke Connect
| Function | Range | Resolution | Accuracy |
| Voltage DC | 0 – 600 V | 0.1 V | 1 % ± 5 counts |
| Voltage AC
(True Rms) |
0 – 600 V | 0.1 V | 1 % ± 5 counts
(45-400 Hz) |
| Current AC
(True Rms) |
0 – 600 A | 0.1 A | 2.0 % ±5 counts,
(45 Hz to 65 Hz) 2.5 % ±5 counts, (65 Hz to 400 Hz) Max Crest Factor (50 Hz/60 Hz) 3 @ 180 A 2.5 @ 220 A 1.42 @ 600 A Note: Add 2 % for C.F. >2 |
| Current DC | 0 – 200 µA | 0.1 µA | 1.0 % ± 5 counts |
| Resistance | 600 Ω
6000 Ω 60 kΩ |
0.1 Ω
1.0 Ω |
1.5 % ± 5 counts |
| Continuity | < 30 Ω | ||
| Temperature | -40 to 400 °C | 0.1 °C | 1 % ± 8 °C |
| Capacitance | 1-100 µF
100-1000 µF |
0.1 µF
1 µF |
1.0 % ± 4 counts |
General Specifications:
| Operating Temperature | -10 C to +50 C |
| Storage Temperature | -30 C to +60 C, without batteries
installed |
| Operating Humidity | Non condensing (< 10 C)
90 % RH (10 C to 30 C) 75 % RH (30 C to 40 C) 45 % RH (40 C to 50 C) |
| Operating Altitude | 2000 meters above mean sea level |
| Storage Altitude | 12,000 meters above mean sea level |
| IP Rating | IP 30 per IEC 60529 |
| Radio Frequency Certification | FCC ID:T68-FBLE IC:6627A-FBLE |
| Wireless Radio Frequency Range | 2412 MHz to 2483.5 MHz |
| Temperature Coefficients | 0.1 x (specified accuracy)/ C (<18 C or >28 C) |
| Size (H X W X L) | 230 x 84 x 46 mm |
| Weight | 382 g |
| Design Standards and Compliance | IEC 61010, IEC 61010-2-032,CE |
| Over-voltage Category | IEC 61010-1, Pollution Degree 2
IEC 61010-2-032: CAT III 600 V / CAT IV 300 V IEC 61010-2-033: CAT III 600 V / CAT IV 300 V |
| Power Requirements | Two AA Batteries, NEDA 15 A, IEC LR6 |
