Fluke FoodPro Plus IR Thermometer

$272.00

Fluke FoodPro Plus Infrared Thermometer

Fluke FoodPro Plus IR Thermometer

Introduction:

Fluke FoodPro Plus food safety thermometer measures both internal and surface temperatures with one handy tool

The Fluke FoodPro Plus thermometer provides a complete temperature measurement and monitoring solution for foodservice professionals. Use the FoodPro Plus to quickly and accurately measure food product temperatures to help detect potential food safety problems. It combines the same infrared surface temperature scanner as the FoodPro, and adds to it a fold out probe thermometer for measuring internal food temperature, and an integrated countdown timer for complete inspections of food temperatures and monitoring cooking and cooling intervals. Like the FoodPro, the FoodPro Plus thermometer is hand-washable and features unique HACCP check lights, which immediately indicate safe or potentially unsafe holding temperatures with either green or red lights.

The Fluke FoodPro Plus is useful for:

  • Receiving: Use the FoodPro Plus thermometer to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program.
  • Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures
  • Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements
  • Equipment Calibration: Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs
  • Dining room: Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste
  • Measures -35 to +275 °C (-31 to 527 °F) with non-contact thermometer and from -40 to 200ºC (-40 °F to +392 °F)with probe
  • Features backlit display for clear readings in poorly lit areas
  • Displays MAX temperature for quick reference
Specifications
Temperature -35°C to 275°C
Accuracy (Assumes ambient operating temperature of 23°C ±2°)

Between 0°C and 65°C: ±1°C

Below 0°C: ±1° ±0.1 degree/degree

Above 65°C: ±1.5% of reading

Response time < 500 ms after initial reading
Spectral response 8-14 microns
Emissivity Pre-set for foodservice applications
Distance to spot size/Optical Resolution (D:S) 2.5:1 @ 90% energy, typical
Typical working range (target illumination) ≈25 mm to 250 mm
Minimum target size 12 mm ø
Illumination to IR channel offset 13 mm
Probe Specification
Temperature -40°C to 150°C
Accuracy (Assumes ambient operating temperature of 23°C ±2°)
Between –5°C and 65°C: ±0.5°C
Below –5°C: ±1°C
Above 65°C: ±1% of reading
Response time 7-8 seconds (3 time constants)
Probe dimensions Diameter: 3.0 mm
Length: 90 mm
Sensor type Thin-film platinum, class A, Resistance
Thermal device (RTD)
Operational Specifications
Repeatability Within accuracy specifications of the unit
Ambient operating range 0°C to 50°C
Relative humidity 90% (±5%) RH non condensing @ 30°C
Storage temperature -20°C to 60°C
Weight 150 g (with battery)
Dimensions 165 x 32 x50 mm
Power, battery life 9V alkaline
Battery Life Alkaline, 10 hours minimum @ 23°C
Target illumination High brightness LED
Display resolution 4 digits, 0.1°C
Displayhold (7seconds) Yes
LCD backlit display Yes
Temperature display 4 digits, 0.2°C resolution
Maximum temperature displayed Yes
Timer Yes
Environmental data IP54 sealing (hand-washable, non-submersible)
Other Specifications
Standards Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible)
Certifications CE NSF
Warranty 2 years
Options/Accessories Replacement probe
At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody. Specifications subject to change without notice.

Includes:

  • Built-in contact probe
  • 9 V alkaline battery
  • Quick start guide
  • Operator\’s guide
  • Soft carry pouch

A Field Replacement Probe (see below) is available as an optional accessory.

Weight 0.15 kg
Dimensions 165 × 32 × 50 mm
Brand

Suppliers