JPQ-M Progressive Distributor
Product Features:
Entire structure, good sealing, high pressure, suitable for heavy load lubrication system;
Sub-mother connection, and can separate oil to secondary and third grades;
Optional installation of cycle indicator for remote monitoring or controlling of the lubrication system.
Model Tag:
Note 1: the suffix “D” refers to joint with one-way valve, no is no one-way valve tighten a screw joint;Receive 8 mm outside diameter of pipe oil outlet need joint length staggered when installation
Note 2: the same mouth on both sides of the valve core to oil displacement;The same pay different discharge in the distributor is only applicable to 2 series;1 each mouth to oil displacement are the same series, and 0.2 ml/cycle;
Note 3: standard model for the even number for 6 ~ 20 oil mouth, if you need an odd number or number of oil of less than 6 mouth to mouth, can also be identified in model.
Model example:
6 JPQ – M1 / d: 0.2/66 series JPQ – 1 M series progressive distributor;Six standard oil outlet;Each displacement 0.2 ml/cycle;Receive 6 mm outside diameter of pipe inlet joint;Oil outlet by 6 mm diameter D check valve pipe fittings.
Technical Parameters:
| Number of holes | ≤6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | |
| JPQ-M1 | H | 60 | 75 | 90 | 105 | 120 | 135 | 150 | 165 |
| JPQ-M2 | H | 74 | 95 | 116 | 137 | 158 | 179 | 200 | 221 |
| Model | Displacement per hole | Nominal pressure | Starting pressure | Ports Number | Inlet and outlet pipe diameter |
| ml/cy | MPa | Mpa | PCS | mm | |
| *JPQ-M1/0.2/** | 0.2 | 31.5 | ≤1.5 | 6~20 | Φ6 Φ8 |
| *JPQ-M2/…/** | 0.15；0.20； | ||||
| 0.30；0.38； | |||||
| 0.48；0.60； | |||||
| 0.72；0.86； |
Product Dimensions:
