AirTAC SC32X400 Cylinder

$20.50

AirTAC Cylinder( Double Acing) SC32X400/ SC32X400S

AirTAC Cylinder( Double Rod) SCD32X400/ SCD32X400S

AirTAC Cylinder( Double Adjustable Stroke) SCJ32X400/ SCJ32X400S

AirTAC Standard Cylinder SC32X400

Ordering Code:

SC Cylinder Ordering Code

Specification:

Bore size 32 40 50 63 80 100
Acting type Double acting
Fluid Air ( to be filtered by 40 µm filter element)
Mounting type SC Basic FA   FB   CA   CB   LB   TC   TCM1
SCDSCJ Basic FA    LB   TC   TCM1
Operating pressure 0/15~1.0 MPa ( 22~145 psi) ( 1.5~10.0 bar)
Proof pressure 1.5 MPa ( 215 psi)(15 bar)
Temperature -20~70
Speed range mm/s 30~800
Stroke tolerance 0~250            25~1000              1001~1500
Cushion type Variable cushion
Adjustable cushion stroke 21 28 29
Port size① 1/8” 1/4” 3/8” 1/2”
  • NOTE: ①PT thread, G thread and NPT thread are available.

Stroke:

Bore size

(mm)

Standard stroke (mm) Max.std stroke Max.

stroke

32 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 1000 2000
40 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1200 2000
50 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1200 2000
63 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000
80 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000
100 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000

Note: If the stroke is ≥1600mm within the maximum strike scope, it is treated as non-standard one. Please contact us for other special stroke.

Product Feature:

  1. Standard cylinder manufactured by our enterprise.
  2. The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.
  3. It is tie rod cylinder. The cylinder barrel and front/ rear cap is jointed by tie rods with high reliability.
  4. Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
  5. The buffer adjustment of cylinder is smooth and steady.
  6. Cylinders and mounting accessories with several specifications are optional.
  7. The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃.

Installation& Usage:

  1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
  2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
  3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
  4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
  5. The medium used by cylinder shall be filtered to 40μm or below.
  6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
  7. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
  8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
  9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
Weight 1.2 kg
Dimensions 550 × 55 × 55 mm
Brand

Suppliers