Impact Bed for Belt Conveyor
Introduction:
Impact beds are used in the loading area of the conveyor belt to replace the traditional impact idler. It is designed to reduce shock and stress to the belt caused by the falling down materials, avoid the abrasion and tear by sharp materials and prevent materials from falling and scattering.
Features:
1.Energy-absorbing impact bars protect conveyor belt from falling materials.
2.Replaceable impact bars.
3.Abrasion-resiatance UHMW cap.
4.Extend belt life.
Technological parameters:
| Type | Width(Belt) | Length(Impact Bar) | Number of Impact Bar | The overall height of the impact bed depends on the site conditions | Width of Idler | ||
| Left Side | Center | Right Side | (mm) | ||||
| DB-THC-50 | 550 | 1220/1400 | 1 | 2 | 1 | 200 | |
| DB-THC-65 | 650 | 1220/1400 | 2 | 2 | 2 | 250 | |
| DB-THC-80 | 800 | 1220/1400 | 2 | 3 | 2 | 315 | |
| DB-THC-100 | 1000 | 1220/1400 | 3 | 3 | 3 | 380 | |
| DB-THC-120 | 1200 | 1220/1400 | 3 | 4 | 3 | 465 | |
| DB-THC-140 | 1400 | 1220/1400 | 4 | 5 | 4 | 530 | |
| DB-THC-160 | 1600 | 1220/1400 | 5 | 5 | 5 | 600 | |
| DB-THC-180 | 1800 | 1220/1400 | 5 | 6 | 5 | 670 | |
| DB-THC-200 | 2000 | 1220/1400 | 6 | 6 | 6 | 750 | |
Selection reference table of the Impact bed:
| Types | Belt Speed(m/s) | Material Gap(m) | Material Size(mm) | Conveying Capacity(t/h) | ||||
| v<4.5 | v≥4.5 | h<3 | h≥3 | k<150 | k≥150 | I<6000 | I≥6000 | |
| DB-HCC Series | √ | √ | √ | √ | ||||
| DB-ZHC Series | √ | √ | √ | √ | √ | |||
| DB-THC Series | √ | √ | √ | √ | √ | √ | ||
Ordering Describtion:
- Which type of impact bed is used?
- When ordering, please note the following contents: belt width(W), impact bar length(L), groove angle(θ), belt height (H), middle frame aperture pitch (A), middle frame aperture diameter (d) and foot hole pitch(M).
- Whether the impact bar is flame retardant or not?
- According to customer’s needs, we would like to undertake various impact bed design and manufacturing.
